Oregon Scientific OS6976 Ring To Ans, SECURITY CO 1 2, Setting The Rings To Answer, Charge Unit

2.Use the CID VOL(+) / CID VOL(-) arrow keys to select ON or OFF. Default is ON.

NOTE: When the pointer > is moved to ON, the unit announces ANSWER ON, PRESS REVIEW KEY TO RECEIVE SETUP INSTRUCTIONS. When it points to OFF, the unit announces ANSWER OFF.

3.Press the flash/program button to store (if a change is made, you will hear a confirmation tone).

SETTING THE RINGS TO ANSWER

You may set the number of times you want the phone to ring before the answering system answers a call.

1.When speakerphone is OFF (not in TALK mode), press flash/program button and CID VOL(+) / CID VOL(-) arrow keys to move the pointer > to point at RING TO ANSWER, press flash/program button to show RING TO ANSWER 3 4 5 6.

RING TO ANS

34

2.Use the CID VOL(+) / CID VOL(-) arrow keys to select the desire rings to answer. Default is 5.

3.Press the flash/program button to store (if a change is made, you will hear a confirmation tone).

SETTING THE SECURITY CODE FOR REMOTE ACCESS

The product provides you with the ability to access the answering system from a tone dialing telephone in another location. A security code is required for remote access, and it prevents unauthorized access to your answering system. Default security code is 1 2 3, and you may only change the security code at the Spacemaker®.

CHARGE UNIT

1.When speakerphone is OFF (not in TALK mode), press flash/program button and CID VOL(+) / CID VOL(-) arrow keys to move the pointer > to point at SECURITY CODE, press flash/program button to show SECURITY CODE 1 2 3 with the first digit blinking.

SECURITY CO 1 2 3

2.Press CID VOL(-) arrow key to change the value of the blinking digit.

3.Press CID VOL(+) arrow key to blink the next digit.

4.Press the flash/program button to store (if a change is made, you will hear a confirmation tone).

EN

16

os6976-en1.p65 19 5/6/2005, 10:32 AM