REMOTE SENSOR
2
1
4
3
5
1.LED status indicator
2.Wall mount hole
3.Battery compartment
4.RESET hole: Reset unit to default settings
5.CHANNEL button: Select channel 1
GETTING STARTED
POWER SUPPLY
Batteries serve as a
equipment and shall be easily accessible
NOTE 
will appear when power supply is not connected.
To insert batteries:
1.Remove the battery compartment and insert batteries, matching polarities.
2.Press RESET after each battery change.
LOCATION | MEANING | |
Clock / alarm area | Main unit batteries low | |
Outdoor / indoor | Sensor batteries low | |
temperature area | ||
|
REMOTE SENSOR
To set up the sensor:
1.Open the battery compartment, and insert batteries, matching polarities.
2.Place the sensor within 30 m (98 ft) of the main unit using the table stand or wall mount.
The transmission range may vary depending on many factors. You may need to experiment with various locations to get the best results.
EN
3
