4.The setting order is: time zone offset,
NOTE Time zone offset sets the clock +/- 23 hours from the received clock signal time.
NOTE The language options are (E) English, (F) French,
(D) German, (I) Italian, and (S) Spanish.
To select display mode:
Press CLOCK to choose between clock with seconds and clock with weekday.
ALARM
To set the alarm:
1.Press and hold ALARM for 2 seconds to enter
2.Press 
/ 
to set hour / minute.
3.Press ALARM to confi rm. 
indicates alarm is ON.
To toggle alarms ON / OFF:
1.Press ALARM to display alarm time.
2.Press ALARM again to turn alarm ON / OFF.
To silence the alarms:
•Press SNOOZE to silence it for 8 minutes
OR
•Press any other key to turn the alarm off and activate it again after 24 hours.
EN
TEMPERATURE
To toggle temperature unit:
Press °C / °F.
To toggle between outdoor / indoor sensor readings:
Press TEMP. 
/ 
indicates indoor and outdoor temperature.
To auto-scan between sensors:
Press and hold TEMP for 2 seconds to display the sensor’s data for 5 seconds.
To deactivate
PROJECTOR AND BACKLIGHT
To activate Projection function:
•Slide PROJECTION switch to ON to illuminate projection continuously.
To activate Backlight function:
•Slide LIGHT switch to ON to illuminate backlight
continuously.
OR
•Press SNOOZE to turn on projector and backlight for 5 seconds.
•Press repeatedly to fl ip dual line projection image by 180 degrees.
NOTE If projection is illuminated, do not look directly
into the projector.
5
