15

Cordless Handset Operations

Switching ON/ OFF

Press and hold the END button for more than 2
seconds to switch on/off the handset in standby mode.
You can switch the handset off to save battery charge.
Note:
The handset cannot be used for Emergency
calls when switched off. Also, it won’t ring during
an incoming call. You need to switch it back on
to answer a call, which might take some time for
the handset to re-establish a radio link with the
base unit.
Make a call
You can input with maximum 24 digits.
Pre-dialing - Dial the number and then press TALK
button.
Note:
You can press BACK button to erase the digits
if you made an error.
Direct dialing - Press TALKbuttonrstandthendial
the number
Note:
You won’t be able to erase and correct the entered
digits in direct dialing mode.

You can also call from Call log/Redial

list/Phonebook

Call from call log
Press Navigation Up button in standby mode and
select the desired entry by using Up/down button
Press TALK button to make a call
Note:
You needsubscribetoCaller Lineidentication
service to view the caller’s number or name in
the call log.
Call from Redial list
Press Redial button in standby mode and select the
desired entry by using up/down button
Press TALK button to make a call
Call from Phonebook
Press Phonebook button in standby mode and select
the desired entry by using up/down button
Press TALK button to make a call
Answer and End a call
Answer – Press TALK button to answer a call when
the phone rings
End – Press END button to end a conversation
COREdE BASE LCd LAYOUT CORdLESS HANdSET OpERATIONS