33
Press OK/CLKbuttontoconrm.Aconrmation tone
will be emitted and the base will return to standby
mode.

Edit a Phonebook entry

Press Phonebook button in standby mode and
select an entry by pressing CID up/down button
Press and hold Phonebook button again till the
Phonebook icon is displayed on the LCD.
Press Mute/C/Delete button to erase the original
number
Key in the number and then press OK/CLK button to
conrm.
Aconrmationtonewillbeemittedandthebase will
return to standby mode.

Delete a Phonebook entry

Press Phonebook button in standby mode and
select an entry by pressing CID up/down button
Press Mute/C/Delete button and the LCD will be
displayed:
Press OK/CLKbuttontoconrm.Aconrmation tone
will be emitted and the base will return to standby
mode.

Delete all Phonebook entries

Press Phonebook button in standby mode
Long press and hold Mute/C/Delete button and the
LCD will be displayed:
Press OK/CLKbuttontoconrm.Aconrmation tone
will be emitted and the base will return to standby
mode.

Caller ID on the corded base

This is a call log that shows the phone numbers of the
incoming calls. There are 20 records can be stored on
the base with maximum 24 digits for each record.
Each CID record will be displayed with the
corresponding time, date and phone number (but CID
name won't be displayed.)

View CID record

Press CID up/down button to browse through the
call log in standby mode
The call log icon will be displayed on LCD, and the
corresponding record number will also be displayed
at the top right corner (such as #01).

Add a CID record into Phonebook

Press CID up/down button in standby mode to select
an entry
Press and hold Phonebook button till the Phonebook
icon is displayed on the LCD
Press Mute/C/Delete button to erase the digits if you
want to edit the number, then press OK/CLK button
toconrm.
HANdSET TONE HANdSET TONECORdEd BASE OpERATIONS CORdEd BASE OpERATIONS