29
ANSWERING SYSTEM ANSWERING SYSTEM4.
CONFIRM? will be displayed on the handset,
press OK button to confirm Or you can simply
press and hold the Mute/C/Delete button on the
base unit to delete all recorded messages.
Record an outgoing message
The pre-recorded outgoing message will be played
to the caller when the answering system answers the
call, unless you have recorded your own message.
1. Press MENU button in standby mode
2. Press Up/Down button to select ANSW MACHINE
and press OKbuttontoconrm
3. Press Up/Down button to select RECORD OGM
and press OKbuttontoconrm.
4. Press Up/Down button to select ANSW.&RECORD
or ANSWER ONLY and press OKbuttontoconrm
5. Press Up/Down button to select RECORD OGM
and press OKbuttontoconrm.
6.
RECORDING. will be displayed on the handset
screen and you can start to record the message
(speak as you normally do during the call)
7. Press OKbuttontoconrmto savetherecorded
message
Delete your recorded OGM
1. Press
MENU button in standby mode
2. Press Up/Down button to select ANSW MACHINE
and press OKbuttontoconrm
3. Press Up/Down button to select RECORD OGM
and press OKbuttontoconrm.
4. Press Up/Down button to select ANSW.&RECORD
or ANSWER ONLY and press OK button to
conrm
5. Press Up/Down button to select DELETE and
press OKbuttontoconrm.
Play the current OGM
The answering machine will play the pre-recorded
outgoing message if you haven’t recorded your own
message.
1. Press
MENU button in standby mode
2. Press Up/Down button to select ANSW MACHINE
and press OKbuttontoconrm
3. Press Up/Down button to select RECORD OGM
and press OKbuttontoconrm.
4. Press Up/Down button to select ANSW.&RECORD
or ANSWER ONLY and press OKbuttontoconrm
5. Press Up/Down button to select PLAY and press
OKbuttontoconrmtolisten
Activate/deactivate Remote control access
Once the remote control access is activated, you can
check the messages of your answering system by
calling from another phone when you are away from
home.