Oricom ECO7100-1 warranty Corded Base Operations, Set Date and Time, Mute Function, Am - D/ - M

Corded Base Operations 31

Corded Base Operations

Set Date and Time

Press and hold OK/CLK button, the LCD will be displayed:

- - : - - AM - - D/ - - M

Select AM/PM Key in the time and date, you can erase the entered content by pressing Mute/C/Delete button if you made an error.

Press OK/CLK button to save the setting. A confirmation beep will be emitted.

Make a call

Pre-dialling - Dial the number in standby mode and then pick up the corded handset or press Speaker button to make the call directly

Note:

You can press BACK button to erase the digits if you made an error.

Direct dialling - Pick up the corded handset or press Speaker button, then dial the number you want to call

Note:

Volume control

During the call, you can adjust the handset receiver/ base speaker volume by pressing Volume up/down button.

There are 5 ringer volume levels available: L1, L2, L3, L4, L5.

In standby mode, you can adjust the base ringer volume by pressing Volume up/ down button.

There are 6 ringer volume levels available: L0, L1, L2, L3, L4, L5.

You can also turn off the base ringer by simply pressing and holding the # button in standby mode, the ring off icon will be displayed on the LCD.

Press and hold # button again to turn on the base ringer, the ringer level will be same as previous setting.

Mute Function

During the call, press the Mute/C/Delete button to activate/ deactivate mute function

Note:

The Mute icon will be displayed on the LCD when mute is activated, and the caller won't be able to hear you.

You won’t be able to erase and correct the entered digits in direct dialling mode.