DEL to do the editing. A name can contain up to 8 characters. If there’s already a phonebook record matching the number, that phonebook name will appear and you can edit it.
3.Press OK to save the name. You will not be able to save it if this name already exists in the phonebook. Edit the name and try again.
4.Edit the number if necessary and press OK to save it.
You have saved the number as a phonebook record. This record in the redial list will now show the name that you have assigned to this number.
Deleting a previously dialled number
While you are viewing a previously dialled number, you can delete it by
1.Press DEL .
2.Press OK to confirm.
USING THE PHONEBOOK
Your phone can store up to 10 phonebook records. Each record can hold up to 8 characters for name, and up to 20 digits for phone number.
A record may contain no name but when it does, the name is unique.
At any time during phonebook programming, you can press 
to quit the programming or cancel the confirmation.
Adding phonebook records
1.During standby mode, enter the phone number for the new record. A phone number can contain up to 20 digits.
2. Press | and you are prompted to enter the name for this record. |
3.Use the number keys to enter the name. If you make a mistake, use DEL to do the editing. A name can contain up to 8 characters.
4.Press OK to confirm the name. You will be alerted to edit the name if it is a duplicated name in the existing phonebook records.
5.You are now prompted with the phone number that you just entered. Edit the number if necessary.
6.Press OK to save the number.
The phonebook record is now successfully stored. Repeat steps 1 to 6 to add another record.
14
