9
Charging the handset
An empty battery icon indicates the batteries need recharging. Place
the handset on the base cradle to recharge the batteries. You should hear
a parking tone (double beep) when handset is put on the charging cradle.
The handset battery icon scrolls during charging. Handset may take
some time to power up and it may get warm during initial charge. This is
normal. A handset reaching a very low battery voltage level will go into
sleep mode, displaying LOW BATT on the screen.
Get into the habit of putting the handset on the base unit to charge when it
is not in use to ensure the handset is always fully charged.
BASIC OPERATIONS
During standby
When the phone is in standby, the LCD displays the handset label. The
handset number related to the connected base will also be displayed right
justified. The battery icon reflects the current battery level and the signal
icon indicates the handset is linked to the base.
Answering an incoming external call
When there is an incoming call, the phone rings and flashes. If a CID
record is received, the caller information is displayed.
turns on if the phone number contains more than 12 digits. In this case,
only the last 12 digits are displayed.
ORICOM
JOHN DOE