- Operation -
A. Please follow the instructions:
Press the MENU button.
Turn the Jog dial until the message “SIM Card Access” appears in the display.
Confirm with YES.
Now open the compartment for the SIM card and insert the card into the holder.
Now slide the cardholder back into the telephone and press the YES button.
Enter your mobile phone’s
Confirm the PIN code with YES. If the PIN code was not entered correctly, you can enter the PIN code again after a few seconds.
WARNING! Please note that there are only three attempts available. After this, the SIM card must be revalidated with the “master PIN” (PUK).
Press YES once more.
Now choose whether you want to copy the telephone numbers from the telephone to the SIM card or from the SIM card to the telephone by using the Jog dial.
Card to phone => Telephone numbers on the card are copied to the telephone
Phone an Card => Telephone numbers in the telephone are copied to the SIM card
Warning: No synchronisation takes place. Any existing data is deleted when copying.
Confirm with the YES button.
Start copying with YES or cancel the function with NO. Warning: When copying from the telephone to the SIM card, an additional safety query is incorporated. Confirm the message “Overwrite?” with YES.
The completion of the copying process is confirmed in the display.
Press NO and remove the SIM card.
After removing, confirm with YES.
Exit programming with the NO button.
Display shows:
Add entry
SIM Card Access
Insert card
Insert card
Wait ... => Pin:_
Pin: ****
Copy all
Card to phone
Card to phone or
Phone to Card
Confirm (Y/N)?
with yes: Wait
with no: Remove card Wait…
Done and then Copy all
Remove card
SIM Card Access
21
