Oster 3200 Assembling Your Oster Food Processor, The Blades Are Extremely Sharp, Is Unplugged

ASSEMBLING YOUR OSTER® FOOD PROCESSOR

Clean Before First Use

A)Bowl, cover, food pusher, disk blade, french fry cutter, chopping blade and dough blade:

THE BLADES ARE EXTREMELY SHARP.

USE CAUTION HANDLING BLADES.

Before you begin, PLEASE BE SURE THAT THE ELECTRIC CORD

IS UNPLUGGED.

1.Set food processor on a dry, level surface with the control buttons on the motor housing to the front.

2.FOR MODELS: 3200, 3212

Place the bowl without the cover with the handle left of switch panel over the drive shaft on the motor base. Rotate the bowl until it drops down evenly on the base. Hold handle and turn the bowl counterclockwise until it locks firmly into position.The bowl handle will be positioned above the control buttons.

FOR MODEL: 3220

Place the bowl without the cover with the handle directly above the switch panel over the drive shaft on the motor base. Rotate the bowl to the right until it drops down evenly on the base. Hold handle and turn the bowl counterclockwise until it locks firmly in place. The handle will be positioned to the right, above the switch interlock platform.

NOTE: Each time you re-assemble your food processor, be sure to attach the bowl first and lock it into position. Then, attach the cover.

3.Place the chopping blade or dough blade over the drive shaft, rotating it slightly

until it drops into place. Add the ingredients. THE BLADES ARE

EXTREMELY SHARP. USE CAUTION HANDLING BLADES.

4.FOR MODELS: 3200, 3212

Attach the cover onto the bowl so that the food chute is on the left side of the bowl. Turn counterclockwise until the cover locks into place. The food chute will be directly above and in line with the handle.

FOR MODEL: 3220

Attach the cover onto the bowl so that the food chute is in the front of the bowl (above the switch panel). Turn counterclockwise until the cover locks into place. The food chute will be directly above and in line with the handle.

5.Plug the power supply cord into an electrical outlet.

6.Start processing by selecting ON or PULSE and pressing the appropriate touch-pad button.

B) Using the slicing/shredding disk and french fry disk attachments:

1.Place the blade shaft over the drive shaft rotating it slightly until it drops into place.

English-3