OTC Wireless manual WiSER2400.IP WiFi Radio, Key Features

WiSER2400.IP WiFi Radio

Key Features

Plug & Play operation—

o No driver on the host device is required for radio operation

o Radio operation is independent of the operating system on the host equipment or device

(Windows 98/NT/2000/ME/XP, Linux, Unix, embedded, etc.), as long as an RS232 port is

properly supported

Supports 64-bit and 128-bit encryption for secured communication

Industry standard IEEE 802.11b-compliant wireless interface

11Mbps data rate and automatic selection of lower data rate (5.5, 2 and 1 Mbps) in degraded RF

environment

Integrated omni-directional-antenna to provide best tradeoff between link-quality and mobility

Microsoft-Windows-based configuration utility

Applications

Standard-compliant wireless networking for computers and equipment with an RS232 interface Embedded devices, tools, instruments, equipment and appliances that can benefit from the re- configurability of wireless link yet are unfriendly to the installation of device-drivers

o POS equipment for stores where re-configuration is frequent o Control/monitor equipment where mobility is required

	Specifications
Model	WiSER2400.IP
Standard	802.11 and 802.11b
Host Interface	RS232
Frequency	2.4GHz – 2.495GHz
RF Channels	11 channels (US, Canada), 13 channels (Europe), 14 channels
	(Japan)
Transmission power	14dBm at antenna input typical
Receiver sensitivity	-80dBm @1e-5 BER typical
Antenna	Integrated dipole antenna with ~2dBi gain
Data Rate	11, 5.5, 2 or 1 Mbps fixed rate, or configured to automatic rate
	selection
Modulation	CCK, Direct Sequence Spread Spectrum
Link Distance	~1200 ft in open space
Network Types	Support normal station to AP link in the infrastructure mode
Data Encryption	Support the standard 64-bit and the 128-bit WEP
Network Security	MAC-address-based access control
AC adapter	Output: 5V, 1A; Input: 100-120V, 50-60Hz, ~0.3A
Current consumption	<480mA (max. reached in transmit-mode)
LED Indicators	4: Power, Transmission, Receiving, Link
Operating	-10°C – 50°C
Temperature
Regulation	FCC part 15,Class B
Compliance	CE ( ETSI EN 300 328-1, ETSI EN 301 489-17)
	IC (for Ubicom-based model)

2