OTC Wireless WiSER2400 manual Status LED’s, Not in use

Status LED’s

Power on the WiSER2400 Radio, the LED’s on the front panel should exhibit the following patterns:

LED	Color	Light Blinking Pattern	Indication
ON	RED	Steady on	Proper power is supplied
RX	GREEN	Steady on	Unit linked to any wireless station
		Steady blink	Unit not linked to any unit
TX	RED	Flickering	Unit transmitting RF signal
LINK	YELLOW	Steady on	Not in use

The WiSER2400.IP radio is configured as a client Station and cannot be changed. As a station, one of the most useful diagnostic tools may be the green RX LED: a blinking green RX LED indicates the absence of a useful communication link.

Once the hardware is checked out to work properly with the intended host device or equipment, the radio can be secured in the desire location by the pair of Velcro pads supplied.

3-foot –P RS232 Cable

An installation example where the WiSER2400.IP is connected to an RS232 equipment (whiteboard)

Radio Power

4