Adjusting Settings

3.5 Television Settings (Optional)

3.5.1 Setting Channels

When connected to a television antenna or CATV cable, the LCD display can automatically scan for available channels. Before scanning, make sure you have selected the correct TV

signal source: air (broadcast) or CATV (cable TV).

TV

 

CH SCAN

 

CCD

OFF

V-CHIP

 

CATV / AIR

CATV

CH ADD/DEL

[–]

ENGLISH

To scan for channels:

1Press MENU to turn the OSD on.

2Press VOL+ to switch to the TV menu.

3Press PRG/CH to select CH-Scan.

4Press VOL + to begin scanning channels.

5The screen displays a number incrementing from 1 to 125 (for NTSC systems in the USA and other countries) as the LCD display scans for available channels.

6Scanning is complete when the channel number stops incrementing (125 for NTSC systems). The channel switches back to the first avail- able channel found.

NOTE:

Several minutes are required for channel scanning to complete.

13

Page 19
Image 19
Ovideon LC2000 user manual Television Settings Optional Setting Channels