Follow these instructions to install an add-on card:

1.Remove a blanking plate from the system case corresponding to the slot you are going to use.

2.Install the edge connector of the add-on card into the expansion slot. Ensure that the edge connector is correctly seated in the slot.

3.Secure the metal bracket of the card to the system case with a screw.

1.For some add-on cards, for example graphics adapters and network adapters, you have to install drivers and software before you can begin using the add-on card.

2. The onboard PCI interface does not support 64-bit SCSI cards.

89

Page 95
Image 95
Packard Bell M5850 manual Onboard PCI interface does not support 64-bit Scsi cards