1818181818 | 18 |
1. Disconnect the Bluetooth cable from the main board.
Fig. 29 Location of bluetooth module.
Note: Optionally, you can disconnect the other end of the cable from the Bluetooth module.
2.The Bluetooth module has been glued onto the casing. Carefully remove the Bluetooth module from the casing (see Fig. 29).
Speakers
To remove the speakers, first remove the top cover (see Top Cover on page 14), and then perform the following steps:
1.Detach any adhesive tape securing the speaker cable in the header on the main board.
2.Disconnect the speaker cable from the header.
Fig. 30 Location of speaker cable header on the main board.
Note: The speaker assembly is integrated in the bottom casing and does not require separate disassembly.
Packard Bell EasyNote SL Disassembly Manual
