Packard Bell SL manual Battery, Hard Disk Drive

Models: SL

1 27
Download 27 pages 19.66 Kb
Page 5
Image 5

44444

4

Battery

Perform the following steps to remove the battery:

1.Make sure the power is off.

2.Turn the notebook upside down.

Note: Use an anti-static mat or something soft like a piece of cloth underneath the notebook to prevent damage to the exterior of the notebook.

3. Slide the battery lock/unlock latch to the unlock position.

Fig. 1 Removing the battery.

4.Slide and hold the battery release latch to the release position and, at the same time, lift the battery upwards. There are three tabs holding the battery in place at the back (see Fig. 1).

5.Take the battery out of the compartment (see Fig. 1).

Hard Disk Drive 1

To remove the left hard disk drive, first remove the battery (see Battery on page 4) and then perform the following steps:

1. Remove the screw securing the left hard disk drive compartment cover.

Fig. 2 Removing hard disk drive compartment cover.

2.Lift the cover upwards from the left. There are two tabs holding the cover in place on the right. Raise the cover until you can remove it from the casing (see Fig. 2).

Packard Bell EasyNote SL Disassembly Manual

Page 5
Image 5
Packard Bell SL manual Battery, Hard Disk Drive