Palsonic TFTV680 owner manual Antenna Connection, Power Connection

Preparations (continued)

Antenna Connection

INSTALL the unit in a room where direct light will not fall upon the screen. Total darkness or a reflection on the picture screen may cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing.

Optimum reception of colour requires a good signal and will generally mean that an outdoor aerial must be used. The exact type and position of the aerial will depend upon your particular area.

75-ohm coaxial cable (round cable)

To antenna

input terminal 300-ohm twin-lead flat feeder

Note:

It is recommended that the 75-ohm coaxial cable be used to eliminate interference and noise which may occur due to radio wave conditions.

The aerial cable should not be bundled with the power cord and the like.

Power Connection

			Household
	AC-INPUT	Plug into AC outlet	power outlet
Bottom view		AC cord

1.Connecting the female plug to the AC socket on the unit.

2.Connecting the male plug to the wall outlet as illustrated.

Note:

This product should be operated only from the type of power source indicated on the marking label.

Always unplug the AC cord from power outlet when not using for a long period of time. This illustration is for reference only. The AC plug may be different on different models.

4