Panamax 7500-PRO owner manual Query Description Response

MAX PRO-SERIES Communication/Configuration Specifications (continued)

QUERIES

Query		Description	Response
2.1	?ID<CR>	Request that the unit identify itself.	$PANAMAX<CR>
			$MAX 74/7500-PRO<CR>
			$FIRMWARE revision<CR>
2.2	?TRIGSTAT<CR>	Request the on/off status of the front panel	if front panel button is ON, $BUTTON = ON<CR>
		button and input trigger.	if front panel button is OFF, $BUTTON = OFF<CR>
			if input trigger is ON, $TRIGIN = ON<CR>
			if trigger input is OFF, $TRIGIN = OFF<CR>
2.3	?OUTLETSTAT<CR>	Request the on/off status of the	$BANK1 = status<CR>
		outlet banks and output trigger.	$BANK2 = status<CR>
			$BANK3 = status<CR>
			$BANK4 = status<CR>
			$HC1 = status<CR>
			$HC2 = status<CR>
			$TRIGOUT = status<CR>
			status = { ON, OFF }
2.4	?POWERSTAT<CR>	Request the status of the input voltage.	if input voltage is within limits, $PWR = NORMAL<CR>
			during overvoltage, $PWR = OVERVOLTAGE<CR>
			during undervoltage, $PWR = UNDERVOLTAGE<CR>
			during recovery, $PWR = RECOVERY<CR>
2.5	?VOLTAGE<CR>	Request the line voltage.	If 140V > Vin > 90: $VOLTAGE = xxx<CR>
			where xxx is the input line voltage expressed in decimal format. If the
			voltage is less than 100, the hundreds digit is represented with a 0.
			For example, a line voltage of 92VAC would be expressed as:
			$VOLTAGE = 092<CR>
			If Vin > 140V: $VOLTAGE = OVERVOLTAGE
			If Vin < 90V: $VOLTAGE = UNDERVOLTAGE
2.6	?CURRENT<CR>	Request the input current draw.	$CURRENT = xxx<CR>
			where xxx is the input current expressed in decimal format. If the cur-
			rent is less than 10, the tens digit is represented with a 0. For example,
			a current of 3.3A would be expressed as:
			$CURRENT = 03.3<CR>
2.7	?HELP<CR>	Request a list of all commands	Transmit a listing of all commands and queries.
		and queries.

12 USA & Canada (800) 472-5555 • (707) 283-5900 • Fax (707) 283-5901