VCR Mode

Playing Back

The recorded scene can be played back immediately after the recording.

1 Set the [OFF/ON] Switch b to [ON].

CAMERA

VCR

OFF ON

b

2 Press the [MODE] Button _.

OThe [VCR] Lamp ` lights up.

_`

 

CAMERA

MODE

VCR

 

$ Adjusting the Sound Volume

Until the [VOLUME] Indication appears, keep pressing the [PUSH] Dial >. Then, turn the [PUSH] Dial to adjust the volume. After the adjustment, press the [PUSH] Dial to make the [VOLUME] Indication disappear.

W.B/SHUTTER/IRIS

> PUSH

VOL/JOG

To adjust the volume with the Remote Controller, press the [T] or [W] Button to display the [VOLUME] Indication. Press the [T] Button to increase the volume or press the [W] Button to decrease the volume. The [VOLUME] Indication goes off a few seconds after the adjustment is finished.

3 Press the [6] Button D to rewind the tape.

DSEARCH

ORewind the tape to the point where you want to start playback.

OWhen the tape reaches the beginning, rewinding stops automatically.

4 Press the [1] Button F to start playback.

OThe [!] Indication appears.

OThe sound volume cannot be adjusted using the Remote Controller in Playback Zoom Function. (-36-)

OIf a cassette recorded with a copyright protection signal is played back, the picture is distorted by mosaic-like patterns.

OFor other notes concerning this item, see -44-.

FBLC

!

To Stop Playback

Press the [$] Button E.

EFADE

32

Page 18
Image 18
Panasonic AG-DVC7 manual Playing Back, $ Adjusting the Sound Volume, To Stop Playback