Panasonic AG-DVC7 manual $ Recording Lamp Tally Lamp, $ To Pause the Recording

Camera Mode

Recording

When recording with the [AUTO/MANUAL/PROG.AE] Switch ? set to [AUTO], the Camera Recorder automatically adjust the focus and white balance. In some cases, they cannot be adjusted automatically and need to be adjusted manually. (-27-,-29-)

AUTO

?MANUAL PROG. AE

1Set the [OFF/ON] Switch b to [ON].

OThe [CAMERA] Lamp ` lights up.

` CAMERA VCR

OFF ON

b

2 Press the Recording Start/Stop Button a (or Sub Recording Start/Stop Button R).

ORecording starts.

OAfter the [RECORD] is displayed, it changes to [REC].

R

a

REC

RECORD

$ Recording Lamp (Tally Lamp)

The Recording Lamp 2 lights up during recording and alerts those being recorded that recording is in progress.

2

OThe Recording Lamp does not light up if the [REC LAMP] on the [OTHER FUNCTIONS] Sub-Menu is set to [OFF].

$ To Pause the Recording

Press the Recording Start/Stop Button a (or R) again.

The [PAUSE] Indication is displayed.

PAUSE

PAUSE

OIf the Recording Pause Mode continues for more than 5 minutes, the power is turned off automatically for tape protection and power conservation. To resume recording from this condition, turn off, then turn on the power again.

$ To Check the Recording

By pressing the Recording Check Button [ ] D briefly in the Recording Pause Mode, you can play back the last few seconds of the recorded scene.

DSEARCH

OThe [CHK] Indication is displayed. After checking, the Camera Recorder resumes the Recording Pause Mode.

$ To View the Recorded Scene while the

Recording is Paused (Camera Search)

The recorded scene can be viewed by keep pressing the [SEARCH –] Button D or [SEARCH +] Button G in the Recording Pause Mode.

DSEARCH

GSEARCH

OWhen the [SEARCH –] Button is pressed, images are played back in the reverse direction.

OWhen the [SEARCH +] Button is pressed, images are played back in the forward direction.

20