Preparation
Recharging the battery
Preparation
Recharging
The battery does not come ready charged when the camera is purchased. Charge the battery before use.
It is recommended that you keep one extra battery as a spare.
1 Connect the power cable to the AC adaptor.
Disconnect the DC cable.
(Battery cannot be charged if DC cable is connected.)
Insert until fully in place.
2 Insert the battery.
Charging lamp [CHARGE]
Align the battery with the mark and insert fully.
■Charging lamp
On: Charging in progress
Off: Charging complete
Flashing: See below
■If charging lamp is flashing
Check that there is no dirt, dust, or other substances attached to the connectors on the battery or AC adaptor, and ensure that the adapter has been connected correctly.
•If there is dirt or dust on the connectors, disconnect the power plug from the socket before cleaning.
•If the charging lamp continues to flash, there may be a fault with the battery or the AC adaptor. Please consult with the place of purchase.
■Charging time and available recording time (Approx.)
Battery | Voltage/ | Charging | Maximum | |
continuous | ||||
model | capacity | time | ||
recording time | ||||
|
|
| ||
|
|
|
| |
7.2 V/ | Approx. | Approx. | ||
2640/2500 | ||||
(included) | (typ./min.) | 170 min. | 85 min. | |
| mAh |
|
| |
| 7.2 V/ |
|
| |
5800/5400 | Approx. | Approx. | ||
(optional) | (typ./min.) | 350 min. | 170 min. | |
| mAh |
|
|
•The figures in the table above are guidelines for use in normal temperature conditions (temperature 25 °C (77 °F), humidity 60 %). Charging may take longer in higher or lower temperatures.
•Charging may take longer if the battery has not been in use for a long period of time.
•The maximum continuous recording times given here assume that the camera is recording in DV mode with no external devices connected.
•Available recording time may vary according to usage conditions.
•Charging times are based on charging batteries from an empty state.
24