Panasonic AG-HMC80P Using as a LCD monitor, Emphasizing outlines, Operations Basic, Opening the eye piece, Closing the eye piece, 2 Press the MENU button

Using as a LCD monitor

Open the eye piece to use as a LCD monitor.

Opening the eye piece

Open the eye piece while pressing the lock button at the same time.

Eye piece

Lock button

Emphasizing outlines

When EVF DTL is assigned to one of the USER buttons 1 to 3, you can press that button to emphasize the outlines of images in the viewfinder and make focus alignment easier.

Emphasizing the outlines does not effect the images you shoot.

1 Set the POWER switch to ON. (Page 30)

2 Press the MENU button.

•Menu operation (Page 40)

•Operations may also be performed using buttons on the remote control that correspond to those on the camera. For details, see “Description of parts (Remote control)”. (Page 23)

3 Select either the USER1 SW, USER2 SW or the USER3 SW item in the setting menu SW&DISP SETUP screen, and press the ENTER button.

4 Select EVF DTL and press the ENTER button.

EVF DTL is assigned to the selected USER button.

Operations Basic

Closing the eye piece

Close the eye piece by pressing it until it clicks into place.

•Rotating the viewfinder with the eye piece open may result in damage to the eye piece or your fingers getting caught.

5 In CAMERA mode or PHOTO mode, press the USER button assigned to EVF DTL. “EVF DTL ON” appears in the center of the screen for about 2 seconds.

To release the setting, press the USER button assigned to EVF DTL again, and “EVF DTL OFF” appears in the center of the screen for approximately 2 seconds.

33