Panasonic AG-HMC80P Power sources, Using the battery, Installation, Removal, Using the AC adaptor

Power sources

Using the battery

Installation Removal

Preparation

Insert the battery until it clicks into place.

1

2

Set the POWER switch to OFF, and check that the mode lamp is off.

Remove the battery while pressing the battery release button.

•The lock can be released and the battery removed.

Using the AC adaptor

Installation

1 Connect the DC cable to the AC adaptor.

2 Plug the AC power supply cable into the power outlet.

3 Insert the DC cable’s battery connector until it clicks into place.

DC cable’s battery connector

Removal

1 Set the POWER switch to OFF, and check that the mode lamp is off.

2 Remove the DC cable’s battery connector while pressing the battery release button.

3 Disconnect the AC power supply cable from the power outlet.

•Battery cannot be recharged when the DC cable is connected to the AC adaptor.

•Disconnect the AC power supply cable from the power outlet when the unit is not going to be used.

CAUTION:

•This apparatus can be operated at a voltage in the range of 110 – 240 V AC.

Voltages other than 120 V are not intended for U.S.A. and Canada.

Operation at a voltage other than 120 V AC may require the use of a different AC plug.

Please contact either a local or foreign Panasonic authorized service center for assistance in selecting an alternate AC plug.

26