Adjusting the grip belt

Adjust the grip belt to suit your hand, and hold it correctly.

1 Open the belt cover and loosen the belt.

When loosening the belt, please take care so that the belt does not come away from the grip belt stopper.

Preparation

Grip belt stopper

2 Work your hand through the grip belt and fasten the belt.

Slip your hand through the belt as far as it goes.

Tighten up the belt so that your hand remains firmly in place.

Attaching the shoulder strap

Attach the shoulder strap and use it as a precaution against dropping the camera.

1 Thread the belt through the shoulder belt installation hole.
2 Install the belt on the other shoulder belt installation hole.

Shoulder belt installation hole.

Thread the belt through the fastener after threading through the shoulder belt installation hole. At least 2 cm of the belt must extend from the fastener.

27