[SIMPLE]
(6-a) Live Mode On Screen Type
(1)Remaining P2 card recording time
| (1) | (2) | Mode indication ( |
| Pause, Record) |
(2) | (3) |
| |||
| |||||
| |||||
| (4) | (3) | Status Display | ||
|
|
| PON: Power On Recording “ON” | ||
|
|
| CARD FULL: No space on P2 card | ||
|
|
| CARD PROTECT: The | ||
|
|
| VUP CARD: Recording is not possible due to P2 card intended for | ||
|
|
| version upgrade | ||
|
|
| UNFORMATTED: P2 card is not formatted | ||
|
|
| REFORMAT: P2 card needs to be reformatted | ||
(5) | (6) |
| ILLEGAL CARD: An unusable card is inserted in VPU | ||
|
|
| NO CARD: No P2 card is inserted in VPU | ||
(7)RUNDOWN: P2 card is closed to the end of its service life
| [DETAILS] |
| (4) | Remaining P2 Card capacity bar |
| ||
|
|
|
|
|
| ||
|
|
| (5) | “Restore” appears only when there is a file that needs to be restored | |||
(8) |
| (1) | (6) | Mark Position | Bookmark position | ||
(9) | (2) | (3) | |||||
|
|
|
| ||||
(10) |
| (4) | (7) | VPU set up Status |
| ||
|
| C2: Camera 2 selected | |||||
|
|
|
| C1: Camera 1 selected | |||
|
|
|
| IR: Camera IR mode is “ON” | IRA: Camera IR mode is “OFF” | ||
|
|
|
| BL: Camera backlight is “ON” TAL: Camera lamp is “ON” | |||
|
|
|
| LOCK: Control Panel Key Lock is “ON” | |||
|
|
| (8) | Speed (MPH/KPH): | |||
|
|
|
| *Target vehicle speed depends on the type of radar gun that is connected | |||
(11) | (5) | (6) | (9) | Location information (latitude) |
| ||
(12) |
| (7) |
| ||||
|
|
|
|
| |||
(10) Location information (longitude)
*If setting on screen type “AUTO” and (1), (2) or (3) is changed, “SIMPLE” on screen type will be appeared on screen for 3 to 5 seconds.
(11)Date/Time
(12)Trigger input status: GPIO 1 to 8 are displayed in order from the left. The letters assigned by “Printable” appear when the “Detection” occurs
