Panasonic AJ-D650 manual Operation

USER menu
	<OPERATION> (continued)
		Item			Setting
										Description
	No.	Superimposed		No.		Superimposed
		display					display
	102	FF. REW	0000				X 32	This sets the maximum speed for FF and REW operations.
		MAX	0001				X 60	0: 32×	normal	speed
			0002				X 100	1: 60×	normal	speed
								2: 100×	normal	speed
								<Note>
								During DV format, the maximum speed is 32× normal speed
								regardless of this setting.
	103	AUDIO	0000				OFF	This sets the status until the audio signal is output when
		MUTE	0001				ON	operation switches from the stop or search modes to the play
								mode.
								0: The time until the audio is output is shortened.
								1: The audio is output after the status stabilizes.
								<Note>
								When set to 0 (OFF), the sound in the initially output part is
								incomplete. Therefore, this setting is not recommended for
								broadcasts.
	104	REF	0000				OFF	This selects whether to warn the operator when the
		ALARM	0001				ON	REF.VIDEO signal has not been connected.
								0: Warning is not given.
								1: Warning is given by the flashing STOP lamp.
	106	PLAY	0000			0		This sets the play delay time in frame increments.
		DELAY
			0015			15
	107	CAP. LOCK	0000				2F	This selects the capstan lock mode.
			0001				4 F	0: 2F mode
								1: 4F mode
	108	FORMAT		0000			DVCPRO	This selects the format which applies when the general
		SEL	0001				DV	purpose cassette is used. After selection, this status becomes
								effective only when the cassette is inserted after ejection.
								0: DVCPRO mode
								1: DV mode
								<Notes>
								Take care not to insert a tape whose format is the reverse of
								the one selected since the following trouble as well as playback
								trouble will occur.
								1. A recording operation is initiated if a DV cassette is inserted
								when the DVCPRO mode is selected.
								No guarantees can be made for performance, etc.
								Conversely, no recording can be conducted if a DVCPRO
								cassette is inserted when the DV mode is selected.
								2. The REMAIN display loses its accuracy.
								3. The accuracy of the slowdown position near the start and
								end of the tape is lost.
	109	EJECT EE	0000				EE	This selects whether EE mode or BLACK is to be used during
		SEL	0001				BLACK	EJECT	status
								0: EE mode
								1: Video blackens, audio mutes.
	110	F/R EE SEL	0000				EE	This selects whether EE mode or playback mode is to be
			0001				TAPE	used during FF/REW operations.
								0: EE mode
								1: Playback mode
	111	STOP EE	0000				EE	This selects whether EE mode or playback mode is to be
		SEL	0001				TAPE	used during stop mode.
								0: EE mode
								1: Playback mode
								<Note>
								The STAND-BY OFF mode complies with the above selection.
								When TAPE is selected, however, the video becomes grey.

The underline on the setting item denotes the initial setting.

– 2 9 –