3. Software specifications

1) Protocol

(1) Communication parameters
Communication system Asynchronous, full duplex
Communication speed 300/600/1200/2400/4800/9600
Bit length
7 bit/8 bit
Stop bit 1 bit/2 bit
Parity bit NONE/ODD/EVEN
ACK code ACK code returned/ACK code not returned
<Note>
The ACK code is what is returned from the VTR to the
controller when data has been successfully sent from the
controller.
The underlining indicates the factory settings.
Any changes to the settings can be made using the set-up menu items listed below.
Communication parameter
Set-up menu item
Communication speed
No. 205 BAUD RATE
Bit length
No. 206 DATA LENGTH
Stop bit
No. 207 STOP BIT
Parity bit
No. 208 PARITY
ACK code
No. 209 RETURN ACK

–E-7–