Panasonic AJ-D650 manual Error No Descriptions VTR operation

Error messages

Error No.	Descriptions		VTR operation
E-57	The start/end processing operation is not completed even after 10 or more seconds
	have elapsed.		Stop
E-59	The cylinder motor speed is abnormally low.
			Stop
E-60	The cylinder motor speed is abnormally high.
			Stop
E-61	The capstan motor speed is abnormally low.
			Stop
E-67	The tape-up reel motor speed is abnormally high.
			Stop
E-69	An abnormal torque applied to the take-up reel motor is detected.
			Stop
E-70	An abnormal torque applied to the supply reel motor is detected or if an abnormal		Stop
	current flowing to the current-sensing resistor is detected.
E-71	An abnormal tension at the supply side is detected in the capstan mode.
			Stop
E-72	An abnormal tension at the supply side is detected in the reel mode.
			Stop
E-73	The reel motor at the take-up side is running in the reverse direction.		Stop
E-FF	Tape start and end are detected simultaneously during loading or after	loading is	Stop
	completed.

– 4 8 –