IEEE1394b Driver for Windows
This driver is for the IEEE1394b interface for the
P2 card on this unit.
| 1) Before installation |
|
|
|
|
| Install the IEEE1394b driver in accordance with | |||
System requirements for the IEEE1394b driver | the following procedures. | ||||||||
<Note> | |||||||||
are as follows. |
|
|
|
|
|
| |||
z OS: Windows XP Professional SP2 or higher | The IEEE1394b driver is installed for each unit | ||||||||
z RAM: 512 | MB or more | (1 GB | or more | is | connected to a personal computer. If you use | ||||
recommended) |
|
|
|
|
| more than one unit on a single personal | |||
z CPU: Pentium®4 | 1.5 | GHz | or | higher | is | computer, install the drivers for the respective | |||
recommended |
|
|
|
|
| units separately. If the IEEE1394b driver are not | |||
<Note> |
|
|
|
|
|
|
| installed, a sufficient transfer rate may not be | |
|
|
|
|
|
|
| obtained. | ||
The IEEE1394b connection in Windows 2000 is | |||||||||
1 In accordance with the descriptions in “4. | |||||||||
not supported. |
|
|
|
|
|
| |||
|
|
|
|
|
|
|
| New Installation of the P2 Software” (from | |
Before installing the IEEE1394b driver, install |
| pages 4 to 6 of the installation manual), | |||||||
the update program provided by Microsoft in |
| install the software up to Procedure No. 8. | |||||||
accordance with the following procedures. If the |
| 2 When the window shown in Fig. 7 of | |||||||
updates are not installed, a sufficient transfer |
| ||||||||
rate may not be obtained. |
|
|
|
|
| Procedure No. 8 (page 6 in the installation | |||
1 Open the Web browser and navigate to the |
| manual) is displayed, select | |||||||
| drive) 1394 driver” and then click OK. | ||||||||
Microsoft website. |
|
|
|
|
| 3 When the message “Please connect AJ- | |||
2 Enter “KB885222” in the search column on |
| ||||||||
| PCD20 (P2 drive) by 1394” is displayed, | ||||||||
the website, and then press the search |
| connect this unit to the personal computer | |||||||
button. |
|
|
|
|
|
|
| using IEEE1394b. Confirm that all five drive | |
3 Click the link for “Performance of 1394 |
| letters of this unit are displayed and then | |||||||
| press Install. | ||||||||
devices | may | decrease after | you install |
| <Note> | ||||
Windows | XP | Service | Pack | 2,” which | is |
| |||
| When the unit is connected to a personal | ||||||||
indicated as a search result. |
|
|
|
| |||||
|
|
|
| computer through USB, remove the USB | |||||
4 Read the information on the displayed |
| ||||||||
| cable and then connect using IEEE1394b. | ||||||||
|
| ||||||||
page, then download and install the update |
|
| |||||||
program on the personal computer. |
|
|
| ||||||
|
|
|
|
|
|
|
|
| |
ENGLISH