Parts and their Functions

Front Panel

(1)

(2)

(3)

(4)

(1)Power Indicator

This indicator lights up in green when the P2 drive is running.

(2)Status Indicator

This indicator lights up in green during access to a P2 card.

<Note>

Do not remove the P2 card during access of the card, otherwise files may be corrupted, or the P2 card may fail.

(3)Card Slots

The P2 drive’s card slots are designed for P2 cards.

The P2 drive does not operate with cards other than P2 cards.

(4)EJECT Button

To remove a P2 card, press this button so that the button pops out, then press it in again.

<Notes>

zFor Windows 2000 only : Open “My Computer” and use the right button of your mouse to select the drive from which you want to remove a card, then select “EJECT” before operating the EJECT button.

zFor Macintosh only: To remove a P2 card, drag the icon of the P2 card to “Trash,” and then press the EJECT button after confirming that the P2 card icon disappears.

Rear Panel

USB 2.0 IEEE 1394b

DC IN 16V

DC IN 12V

(1)

(2)

(6)

(5)

(3)

(4)

The picture shows the rear panel with its cover removed.

(1)USB 2.0 connector (Type B)

This connects a USB cable. Use a USB cable (shielded) compliant with USB 2.0.

<Note>

The P2 drive supports USB 2.0 only. It does not support personal computers compliant with USB 1.1. For Macintosh, USB 2.0 operations are not guaranteed.

(2)IEEE1394b connector

This connects an IEEE1394b cable.

<Note>

When cables are connected to both the USB

2.0connector and IEEE1394b connector, only the interface that was connected first after turning on the power is available.

(3)DC IN 16V Socket

For external use of the P2 drive, connect an AC adapter to this socket.

(4)DC IN 12V Socket

To use the P2 drive mounted in a personal computer, connect one of the power supply connectors inside the personal computer to this socket. (See page 10)

<Note>

Do NOT supply power to both the DC IN 12V socket and DC IN 16V socket at the same time.

(5)Cable Clamp

Use this clamp to secure the AC adapter cable when connecting the P2 drive to a personal computer for external use of the Drive.

(6)Antitheft Lock

A commercially available antitheft cable can be connected to this lock.

ENGLISH

E-6