IEEE1394b Driver for Windows (continue)
3)Confirmation of installation of the IEEE1394b driver

Confirm whether the IEEE1394b driver is installed properly in accordance with the following procedures.

1 Connected this unit to a personal computer using IEEE1394b.

2 Open Control Panel from the Start menu, and select System to display system properties.

3 Select the Hardware tab in the system properties and then press the Device Manager button.

4 Open the tree for “Disk drive” using Device Manager, and then press the right button for “MATSHITA AJ-PCD20# IEEEE 1394 SBP2 Device” to open properties.

5 Select the Driver tab in properties, and then press the Driver’s details button.

6 If the following files are included in the displayed driver file list, the IEEE1394 driver was installed properly.

“p2sbp2.sys”

“p2cmgr.dll”

“p2csvc.exe”

7 For the following devices, confirm the installation using the same procedures as Nos. 4 to 6.

“MATSUSHITA AJ-PCD20 #2 IEEE 1394 SBP2 Device”

“MATSUSHITA AJ-PCD20 #3 IEEE 1394 SBP2 Device”

“MATSUSHITA AJ-PCD20 #4 IEEE 1394 SBP2 Device”

“MATSUSHITA AJ-PCD20 #5 IEEE 1394 SBP2 Device”

<Note>

When using IEEE1394b, only one AJ-PCD20 can be connected to the personal computer. If two or more AJ-PCD20 units are connected

simultaneously, operations cannot be guaranteed.

E-13