1 Attach the rubber feet to the dimples on the | 4 (To be connected by USB 2.0) |
base of the P2 drive. | Plug a USB 2.0 cable B connector into the |
| USB connector on the P2 drive. then plug the |
| other end (A connector) of the USB 2.0 cable |
Dimples | into the USB 2.0 port on the personal |
| computer. |
ENGLISH
2 Start the personal computer.
3 Plug the AC adapter supplied with the P2 drive into the DC IN 16V socket on the P2 drive.
The P2 drive will start.
USB 2.0 IEEE 1394b
DC IN 16V
DC IN 12V
USB 2.0 IEEE 1394b
DC IN 16V
DC IN 12V
USB 2.0 connector
<Note>
No USB 2.0 cable is supplied with the P2 drive in the package. Use a commercially available USB 2.0 cable (shielded).
Take care to use a USB cable that is no longer than 3 metres. The P2 drive may not operate properly with a cable longer than 3 metres.
For Macintosh, USB 2.0 operations are not guaranteed.