IEEE1394b Driver for Macintosh

This driver is for the P2 card on this unit.

Installation of the IEEE1394b driver

1 Insert the installation CD.

2 Double-click the Macintosh folder on the CD.

3 Double-click the AJ-PCD20folder.

4 Double-click “P2Drive Install.dmg” in the AJ-PCD20folder.

5 Double-click “P2Drive Install.pkg”.

6 When driver installation starts, follow the instructions on the installation screen.

<Notes>

zBy installing this driver, it is possible to connect to this unit to the Macintosh using IEEE1394b (Firewire 800) to transfer data at a higher rate.

zThe P2 card must be formatted using other P2 devices.

zWhen the P2 card is removed or the IEEE1394b cable is disconnected, drag the icon for the P2 card to Trash and confirm that the P2 card icon disappears before executing removal or disconnection.

zReinsert the P2 card if the P2 card icon is not displayed.

ENGLISH

E-14