Inserting a P2 Card

When inserting a P2 card into the slot in the P2 drive, make sure you keep the card horizontal as you ease it in.

Forcing the card in on an angle may cause a problem.

Write-protection of P2 Card

A P2 card has a write-protect switch. Setting this switch to “PROTECT” can prevent writing and deleting of data.

Note: The write-protect switch is not effective when the P2 card is inserted in the P2 drive. Make sure you remove the P2 card from the P2 drive, set the switch, then re-insert the card, in order to effect the switch setting.

PROTECT

Setting the write- protect switch to “PROTECT” can prevent writing and deleting of data.

Setting the write- protect switch to this side allows writing and deleting of data.

Installation

There are two ways to connect the P2 drive to a personal computer (Windows/Apple Macintosh) :

1.Using the P2 drive as an external drive connected to a personal computer (Windows/Apple Macintosh)

2.Mounting the P2 drive in a 5-inch bay of a desktop personal computer (Windows)

E-7