Joystick
(1)Press the SEARCH button to activate the joystick.
When STICK has been selected as the setup menu item No.100 (SEARCH ENA) setting, the joystick will be activated without pressing the SEARCH button.
(2)Press the joystick to switch between the SHTL mode and SLOW mode.
(3)When the joystick is inclined toward the right, the tape can be played back in the forward direction at a variable speed based on the angle that the stick is inclined. When the stick is inclined toward the left, the tape is played back in the reverse direction.
•SHTL mode:
The maximum speed which is established when the joystick has been inclined at the maximum angle corresponds to the speed which has been set by setup menu item No.101 (SHTL MAX).
•SLOW mode:
The speed ranges from
•If the SEARCH button is pressed while the joystick is pressed to one side, the current speed is maintained even if the joystick is released. Pressing the STOP, PLAY, or other operation buttons cancels the fixed speed operation.
|
|
|
|
|
|
|
|
|
| (2) | |
POWER |
|
|
|
|
|
|
|
|
|
| EJECT |
ON |
|
|
|
|
|
|
|
|
|
|
|
OFF |
|
|
|
|
|
|
|
|
|
|
|
CONTROL | REC INHIBIT |
|
|
|
|
|
|
|
|
| |
LOCAL REMOTE | OFF | ON |
| Digital Video Cassette Recorder AJ- |
|
|
|
| |||
METER |
|
|
|
|
|
|
|
|
|
| PUSH |
FULL/FINE |
|
|
|
|
|
|
|
|
|
| SHTL/SLOW |
|
|
|
|
|
|
|
| SEARCH | PLAY | REC | |
|
|
|
|
|
|
|
|
|
| ||
MONITOR SEL |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| REW | STOP | FF |
HEADPHONES | CH 1 | CH 2 | CH 3 | CH 4 | REC PB | INPUT SELECT | COUNTER RESET | TC | INT | TCG SUPER | |
| VIDEO | AUDIO | PRESET | MENU | ON | ||||||
|
|
|
|
|
|
|
| REGEN | |||
|
|
|
|
|
|
|
|
|
| PRESET | OFF |
|
|
|
|
|
|
|
|
|
| EXT | |
|
|
|
|
| UNITY |
| PF | PF1 PF2 | PF3 | DIAG |
|
(1)
(4) When the joystick is inclined upward, the |
|
|
| (4) |
tape travels in |
|
|
| |
forward direction; when it is inclined |
| (3) |
| (3) |
downward, it travels in | tte Recorder AJ- |
| ||
the reverse direction. |
|
|
| PUSH |
Slow playback is performed if the stick is |
|
|
| SHTL/SLOW |
|
| PLAY | REC | |
|
| SEARCH | ||
held at the top or bottom position. |
|
| (4) | |
|
|
|
PF (Programmable Function)
Three setup menu items can be registered in the PF buttons, and these buttons can then be used to change the setup menu settings by a simple operating procedure.
Registering the items in the PF buttons |
| Performing operations using the PF buttons |
|
|
|
(1)Press the MENU button, and open the setup menu.
(2)Incline the joystick upward or downward to select the PF number item
MENU |
| ||
<USER1> | NO . A 0 4 - | ||
A 0 2 | P. ON LOAD | OFF | |
A 0 4 | PF1 ASSIGN | 012 | |
A 0 5 | PF2 ASSIGN | 513 | |
A 0 6 | PF3 ASSIGN | ||
END
(3)When the joystick is pressed, a list of items which can be set is displayed.
| ||
<USER1> | NO . A 0 4 - | - - - |
A04 PF1 ASSIGN | ||
---N O A S S I G N
001 LOCAL ENA
002 TAPE TIMER
003 REMAIN SEL
008 DISPLAY SEL
009 CHARA
010 CHARA
(4)Incline the joystick upward or downward to select the item.
(5)When the joystick is pressed, the regular menu display screen is restored.
When the MENU button is pressed, a confirmation screen appears. Press the PLAY button to set.
(1)When the PF button is pressed, the registered items are displayed on the monitor screen which is output from the VIDEO MON connector.
PF1: SYS FORMAT | 50M |
PF2: INT SG | CB75 |
PF3: |
(2)Press the PF1, PF2 or PF3 button that corresponds to the item whose setting is to be changed. Each time the button is pressed, the setting is updated in sequence.
(3)When the PF button is pressed again, the regular display is restored. If no operations are made, the display is also restored automatically after five seconds elapse.
– 15 –