Panasonic AJ-SD93, AJ-SDd93 manual 39

Error messages (continued)

If “T&S&M” is selected in the setup menu No. 008 (DISPLAY SEL), a message appears in the modedisplay whenever a warning or error occurs. When multiple events occur, the event with the highest priority is displayed.

Priority	Display	Description
High	Error messages	When an operational malfunction has occurred in the unit, the error number
	(See error message table)	flashes and the error message is indicated on the counter display.
		When SG has been selected as the input signal by the INPUT SELECT button, the
	INT SG	“INT SG” display will appear for the first two seconds at the start of operation (E-E
		mode) when the REC button is pressed.
		If there are no input signals--with the exception of the analog audio signals--
	NO INPUT	supplied to the connectors selected by the INPUT SELECT button, the “NO
		INPUT” display will appear for the first two seconds at the start of operation (E-E
		mode) when the REC button is pressed.
	Warning messages	When a warning occurs in this unit, the error number and warning message are
		indicated on the counter display.
Low	(See error message table)
		When multiple warnings occur, the warning with the highest priority is displayed.

UMID information display

This is displayed when UMID information is present on the input signal in E-E mode.

This lamp lights during tape playback when UMID information has been recorded on the tape. “NO-INFO” is displayed when there is no UMID information.

Display		Description
MATNO	Material number
COPY	Instance number (No. of copies)
OWNR	Country, organization, user
	Reception status from GPS satellites when recording spatial coordinates (height above sea
	level, longitude and latitude):
POS	HOLD : No reception from any satellite
	2D	: Reception possible, but number of satellites is insufficient. Height above sea level
		will not be accurate.
	3D	: Good reception
DATE	Date
TIME	UTC (Coordinated Universal Time) and time difference with UTC

– 39 –