Setup menus (continued)

USER menu <VIDEO>

No./ItemDescription

623For setting 7.5% setup processing to be performed on input and output

SETUP 50

signals in the DVCPRO50 (50 Mbps)

(For AJ-SD93P)

mode.

 

 

When the STOP button is pressed,

 

operation is transferred to the sub-

 

screen, and the setup level is set for

 

each output. To return from the sub-

 

screen, press the STOP button again.

 

 

 

Sub-screen

 

 

 

 

00

This selects the 7.5% setup processing

 

for the input composite signal.

CMPST IN

 

 

 

0000

THRU :

 

The signal is recorded in its original

 

form.

 

 

0001

CUT :

 

The signal is recorded with the

YA93P

7.5% setup removed.

 

 

01

This selects the 7.5% setup processing

CMPST OUT

for the output composite signal.

 

 

 

0000

THRU :

 

The signal is output in its original

 

form.

 

 

0001

ADD :

 

The signal is output with the 7.5%

 

setup added.

 

Note:

 

 

Bear in mind the setting for sub-screen

 

item No. 03 (CMPNT OUT) of setup

 

menu item No. 623 (SETUP 50).

 

 

02

This selects the 7.5% setup processing

CMPNT IN

for the input component signal.

 

 

 

0000

THRU :

 

The signal is recorded in its original

 

form.

 

YA93P

0001

CUT :

The signal is recorded with the

 

YA94G

7.5% setup removed.

 

 

03

This selects the 7.5% setup processing

CMPNT OUT

for the output composite, component

and serial (digital) signal.

 

0000

THRU :

 

The signal is output in its original

 

form.

 

 

0001

CUT :

 

The signal is output with the 7.5%

 

setup removed.

YA93P

0002

ADD :

The signal is output with the 7.5%

 

YA94G

setup added.

 

 

 

The underlined items indicates the initial setting. YA93P This appears only when the optional board

AJ-YA93P has been installed.

YA94G This appears only when the optional board AJ-YA94G has been installed.

No./Item

 

Description

 

 

624

For selecting whether to record the

CC REC

closed caption signals multiplexed

on the input signals on the tape.

(For AJ-SD93P)

 

 

 

0000

OFF :

 

No closed caption signal is recorded.

 

0001

ON :

 

When a closed caption signal is

 

detected from the selected input

 

signal, it can be recorded.

 

Note:

 

 

If 1394 signals have been selected as

 

the input signals using the INPUT

 

SELECT button, the closed caption

YA93P

signals which have been multiplexed

onto the input signals will be recorded

 

YA94G

on the tape regardless of the setting.

 

 

645

This selects whether or not to record

WIDE

the wide-screen information on the tape.

 

 

SELECT

0001

WIDE :

 

The wide-screen information is not

 

recorded on the tape.

 

0002

NORMAL :

 

The wide-screen information is

 

recorded on the tape.

 

Note:

 

 

If 1394 has been selected as the input

 

signals using the INPUT SELECT

 

button, the wide-screen information on

 

the input signals will be recorded

 

regardless of this menu’s setting.

660This selects whether or not to record the UMID information on the

UMID REC

tape.

0000 OFF :

UMID information is not recorded on the tape.

0001 ON :

UMID information is recorded on the tape.

Note:

If 1394 has been selected as the input signals using the INPUT SELECT button, UMID will not be recorded even when it is set to ON unless the input signal can be detected.

– 29 –