Panasonic AJ-SPC700 P manual 47

Chapter 4 Adjustments and Settings for Recording (continued)

Information Item	Indication	Status
Camera Warning and	AWB A ACTIVE	AWB being performed on Ch A.
Report Area	AWB B ACTIVE	AWB being performed on Ch B.
	AWB A OK _._K	AWB successful on Ch A.
(related to AWB, ABB
	AWB B OK _._K	AWB successful on Ch B.
and switch settings)
	AWB BREAK _._K	AWB action aborted by user.
	AWB NG	AWB action failed. The second line indicates the status.
	COLOR TEMP LOW	Color temperature too low.
	COLOR TEMP HIGH	Color temperature too high.
	LEVEL OVER	Brightness too high.	4
	LOW LIGHT	Brightness too low.
	TIME OVER	Action timed-out.
	AWB PRESET _._K	AWB cannot proceed because the AWB switch is positioned at [PRE].
	ATW MODE	AWB cannot proceed during ATW.
	CHECK FILTER	Make sure the FILTER control is positioned correctly.
	AWB A VAR_._K	AWB cannot proceed because [A] is set to “VAR”.
	AWB B VAR _._K	AWB cannot proceed because [B] is set to “VAR”.
	ABB ACTIVE	ABB being performed.
	ABB OK	ABB action successful.
	ABB BREAK	ABB action aborted by user.
	ABB NG	ABB action failed.
	W-SHD ACTIVE	White shading being adjusted.
	W-SHD OK	White shading has been adjusted.
	W-SHD BREAK	White shading action aborted by user.
	W-SHD NG	White shading adjustment failed due to excessive brightness.
	LVL OVER
	B-SHD READY	Black shading accepted (by holding down the ABB switch during ABB
		adjustment).
	B-SHD ACTIVE	Black shading being adjusted.
	B-SHD OK	Black shading adjustment successful.
	B-SHD BREAK	Black shading adjustment aborted by user.
	B-SHD NG	Black shading adjustment failed.
(Switch changeover	WHITE: # _._K	The WHITE BAL switch has been switched. # is replaced with A, B or PRE.
indication)		When [A] and [B] are set to “VAR”, then it is indicated as VAR _._ K. When
		[B] is assigned ATW, then it is indicated as ATW MODE.
	AUTO KNEE: ON/OFF	AUTO KNEE switch has been switched to ON or OFF.
	GAIN:__dB	Gain has been switched with the GAIN selector switch or a user button.
	SS: 1/____	When the shutter speed has been switched, the shutter speed is indicated.
	SS: 1/____	Shutter speed is in SYNCRO SCAN mode.
	SS: SUPER V	Shutter speed is in SUPER V mode.
	FILTER: _ _._K	Filter position and detail have been switched.
	EXTENDER: ON/OFF	Lens extender has been turned on or off.
	IRIS: __ F _._	Indicated when the iris override correction value is to be changed.
(Low light warning)	LOW LIGHT	Brightness too low.
(Y GET value)	___._%	When the Y GET function is being carried out (the output brightness level near
		the Center marker is being measured for about three seconds: the level is
		represented as a percentage), the output brightness level near the center
		marker is indicated as a percentage.
(MARKER indication)	MKR: A/B/OFF	Current marker type
User button	INH	User buttons disabled.
functions	S.GAIN __dB/OFF	Selected S.GAIN
	S.IRIS ON/OFF	Whether S.IRIS is ON or OFF.
UM: USER MAIN
	I.OVR ON/OFF	Iris override can be set (the IRIS OVERRIDE setting is ON).
button
	S.BLK –__/OFF	Status of SUPER BLACK (ON or OFF). When it is ON, the set value is also
U1: USER1 button		indicated.
U2: USER2 button	B.STR ON/OFF	Status of BLACK STRETCH (shade correction for the black level): ON or OFF
	AUDIO CH1	Input signal to be recorded on Audio Channel 1 has been switched.
	AUDIO CH2	Input signal to be recorded on Audio Channel 2 has been switched.
	REC SW	USER button acts as REC switch.
	Y GET ON	Y GET function ON.
	RET SW	USER button acts as RET switch.
	ATW ON/OFF	ATW being performed.
	NEWS-G ON/OFF	Status of News Gamma (ON or OFF)
	SLOT SEL	Switch that changes the target card is set.
	PRE REC	Indicates that PRE RECORDING mode has been switched ON or OFF.
	USB	Indicates whether USB Drive Mode is ON or OFF.
Filter position	1 - 4	Position of the CC/ND filter.
	-	Filter not positioned correctly.
WHITE BAL switch	A	WHITE BAL switch positioned at [A].
position	B	WHITE BAL switch positioned at [B].
	P	WHITE BAL switch positioned at [PRE].
	T	ATW mode active. When brightness and color are outside operating limits, the
		indication blinks.

47