Panasonic AJ-SPC700 P manual 49

Chapter 4 Adjustments and Settings for Recording (continued)

Information Item				Indication	Status
PRE RECORDING		P-REC (blink)			Indicated while pre-recorded video and audio are being recorded on the P2
indication/					card. If the USER switch is set to perform the PRE REC function, either “P-
					REC OFF” or the specified duration “1s - 8/15s” is displayed when the PRE
SD memory card
					RECORDING mode is switched by pressing the USER switch.
remaining free space					If a video encoder card (AJ-YAX800G, optional accessory) is attached, the
		[SD]
(when MODE CHECK					remaining free space on the SD Memory card will be displayed when the
		__h __m
is being performed)					MODE CHECK button is pressed during proxy recording.
ID record indication		ID			The ID is set to be superimposed on the video from the camera.
						4
Battery type		PRO14 - AC_ADPT			Battery type, selected through a menu option. When the AC adapter is
					connected, it is indicated as AC_ADPT.
Battery remaining		__._V			Battery remaining level in tenths of a volt
level/voltage	___%				Digital battery remaining level, as a percentage
		EMP			Digital battery empty.
		MAX			Digital battery fully charged.
Camera-recorder		REC			The indication stays illuminated during recording. This is displayed when the
REC indication					menu option REC TALLY of the SYSTEM MODE is set to “CHAR”.
					This can also be displayed during the recording using the AJ-SPC700P alone.
					This is displayed when the menu option REC STATUS of the VF INDICATOR2
					is set to “ON”.
P2 card remaining		___min			The indication “___min” stays illuminated under normal conditions or blinks
free space		END			when the remaining level is near zero.
					When the card space is used up, “END” comes on.
		WP			The P2 card is write-protected.
		LOOP			The camera-recorder is in LOOP REC mode. When loop recording cannot be
					performed, for example because the P2 card has no free space, the indication
					blinks.
		INFO P2			P2 card being recognised.
	_/_				Total free space/capacities of the P2 cards (when MODE CHECK is being
					performed).
					<Note>
					When the menu option P2 CARD REMAIN is set to “ONE CARD”, the number
					of the P2 card slot that contains the target card is indicated, together with the
					remaining space.
					For more information, see [P2 Card Remaining Free Space/capacity
					Indication] (page 50).
P2 card remaining		[1]	___min		The number of the P2 card slot that contains the target card and the
free space (when					remaining free space (when MODE CHECK is being performed) are
					indicated. In LOOP REC mode, the minimum guaranteed recording time is
MODE CHECK is
					indicated. This indication also appears when the target P2 card has been
being performed)					switched with a user button.
					The minimum guaranteed recording time refers to the sum, at the time loop
					recording is stopped, of the remaining free space of available P2 cards,
					except for the card with the largest remaining free space.
					Example: If three P2 cards are available, with remaining space of eight
					minutes, five minutes and two minutes respectively, then the
					minimum guaranteed recording time is seven minutes.
Super iris ON/super		S			Super iris ON.
black ON		B			Super black ON.
		SB			Super iris and super black both ON.
Color temperature		_._K			Color temperature assigned to A, B, and PRE of the WHITE BAL switch (this
					is a value stored at AWB performance or a value set through the menu
					option). The indication is not provided in ATW mode.
Shutter speed/mode	1/__._				Shutter speed set to SYNCHRO SCAN.
	1/100 - 1/2000				Shutter speed fixed.
		SUPER V			Shutter speed set to SUPER V (high vertical resolution mode).

49