Chapter 6 Manuipulating Clips with Thumbnails (continued)

6-17 Properties

The clip’s properties and the P2 card’s status are displayed.

6-17-1 Clip Property

From the menu bar, select PROPERTY  CLIP PROPERTY.

The following screen appears.

Clip Number

Thumbnail

Slip Information

Displays the number of markers and voice memos attached to the clip.

The mark appears if the clip is recorded on a write- protected P2 card.

Slot Number

Clip Information

Displays detailed information about the clip.

CLIP NAME:

Display clip names.

START TC:

The time code value at the start of the recording.

START UB:

The user bit value at the start of the recording. DATE: The date of the recording.

TIME The time at the start of the recording.

DURATION:

The time length of the clip.

CODEC: The recording format of the clip.

Clip Meta Data

Displays more detailed data about the clip. Use the cursor buttons to move the pointer, and press the SET button to check the detailed content. The underlined items are automatically set during shooting. For more information on displayed metadata, see [6-12 Setting of Clip Meta Data].

6-17-2 P2 Card Status Display

P2 Card Status Display Settings

Select PROPERTY  CARD STATUS from the menu bar to set the desired indication mode (remaining free space or used memory capacity) for the P2 card status display.

1Press the THUMBNAIL button.

The thumbnail screen appears on the LCD monitor.

2Press the MENU BAR button. The pointer moves to the menu bar.

3From the menu bar, select PROPERTY  PROPERTY SETUP.

The following screen appears. Select the P2 card status display settings from the P2 CARD CAP menu option.

REMAIN:

Show remaining free space on the P2 card as the P2 card status display.

USED:

Show used memory capacity on the P2 card as the P2 card status display.

88