Setting menu items
TOP MENU
This is the first screen displayed when you hold down the MENU button.. Select one of the menus..
TOP MENU
OPERATION
MAINTENANCE
zzSETTING1 Screen
This is the selection screen for the SETTING1 menu..
Moving the cursor to the “SETTING1” menu title and then pressing the SELECT dial redisplays the OPERATION menu one level up..
SETTING1 |
|
CCU MODE | 1080/59.94i |
SDI RETURN1 | HD |
SDI RETURN2 | HD |
SDI OUTPUT1&2 | HD |
SDI OUTPUT3&4 | HD |
NORMAL/PM | PM |
COMPOSITE |
|
NORMAL/PM | PM |
zzOPERATION
Select this to open the OPERATION menu screen..
zzMAINTENANCE
Select this to open the MAINTENANCE menu screen..
OPERATION menu
This is the selection screen for the OPERATION menu..
Moving the cursor to the “OPERATION” menu title and then pressing the SELECT dial redisplays “TOP MENU”..
OPERATION
SETTING1
SETTING2
H
D/SD PH
ASE
BAR ID
INCOM/MIC
zzSETTING1
Select this to display the SETTING1 screen..
zzSETTING2
Select this to display the SETTING2 screen..
zzHD/SD PHASE
Select this to display the HD/SD PHASE screen..
zzBAR ID
Select this to display the BAR ID screen..
zzINCOM/MIC
Select this to display the INCOM/MIC screen..
indicates the factory default setting..
Item | Setting | Remarks | |
value | |||
|
| ||
|
|
| |
CCU MODE | 59..94 Hz: | Set the format of the signal to be output | |
| 1080/59..94i | from the unit.. | |
| 1080/50i |
| |
|
|
| |
| 50 Hz: |
| |
| 1080/59..94i |
| |
| 1080/50i |
| |
|
|
| |
SDI RETURN1 | HD | Set the format of the return signal to be | |
| SD | input to [HD/SD SDI 1] of the RETURN | |
|
| IN connectors.. | |
|
|
| |
SDI RETURN2 | HD | Set the format of the return signal to be | |
| SD | input to [HD/SD SDI 2] of the RETURN | |
|
| IN connectors.. | |
|
|
| |
SDI OUTPUT1&2 | HD | Set the format of the signals to be | |
| SD | output from [1] and [2] of the HD/SD | |
|
| SDI OUT connectors.. | |
|
|
| |
SDI OUTPUT3&4 | HD | Set the format of the signals to be | |
| SD | output from [3/PM] and [4/PM] of the | |
|
| HD/SD SDI OUT connectors.. | |
|
|
| |
SDI OUTPUT3&4 | NORMAL | Set the signal to be output from [3/PM] | |
NORMAL/PM | PM | and [4/PM] of the HD/SD SDI OUT | |
|
| connectors.. | |
|
| NORMAL: | |
|
| Output the main line images.. | |
|
| PM: | |
|
| Output the picture monitor images.. | |
|
|
| |
COMPOSITE | NORMAL | Set the signal to be output from | |
NORMAL/PM | PM | [OUT/PM] of the VBS connectors.. | |
|
| NORMAL: | |
|
| Output the main line images.. | |
|
| PM: | |
|
| Output the picture monitor images.. | |
|
|
|
zzWhen the SDI OUTPUT3&4 NORMAL/PM item and COMPOSITE NORMAL/PM item are set to “NORMAL”, the menus and statuses will not be able to be displayed because the picture monitor images will not be output..
When one of items is set to “NORMAL”, the other one is set to “PM” as both of the items cannot be set to “NORMAL”..
11