Web settings (Continued)
zzItem setting operations (settings)
The current settings are displayed on the setting screen..
When you change a setting and then select the “SET” button on the screen, the new value is reflected on the unit..
Notes
zzWhen a setting has also been changed on the unit, the value that was set last takes priority..
In a case like this, there may be a discrepancy in the values set.. zzWhen a setting outside the setting range is selected using
keyboard input and the “SET” button is selected, the input check will result in an error..
In a case like this, the setting item will be restored to its original value..
Description of menus
Initial screen
This is the screen that appears first when a connection is established to the URL you specified on the computer..
The menu for the “SETTING1” item on the “OPERATION” menu is displayed..
Items when the OPERATION menu is selected
Display the SETTING1 screen..
Display the SETTING2 screen..
Display the HD/SD PHASE screen..
Display the BAR ID screen..
Display the INCOM/MIC screen..
zzSETTING1 Screen
indicates the factory default setting..
Item | Setting | Remarks | |
value | |||
|
| ||
|
|
| |
CCU MODE | 59..94 Hz: | Set the format of the signal to be output | |
| 1080/59..94i | from the unit.. | |
| 1080/50i |
| |
|
|
| |
| 50 Hz: |
| |
| 1080/59..94i |
| |
| 1080/50i |
| |
|
|
| |
SDI RETURN 1 | HD | Set the format of the return signal to be | |
| SD | input to [HD/SD SDI 1] of the RETURN | |
|
| IN connectors.. | |
|
|
| |
SDI RETURN 2 | HD | Set the format of the return signal to be | |
| SD | input to [HD/SD SDI 2] of the RETURN | |
|
| IN connectors.. | |
|
|
| |
SDI OUTPUT 1&2 | HD | Set the format of the signals to be | |
| SD | output from [1] and [2] of the HD/SD | |
|
| SDI OUT connectors.. | |
|
|
| |
SDI OUTPUT 3&4 | HD | Set the format of the signals to be | |
| SD | output from [3/PM] and [4/PM] of the | |
|
| HD/SD SDI OUT connectors.. | |
|
|
| |
SDI OUTPUT 3&4 | NORMAL | Set the signal to be output from [3/PM] | |
(NORMAL/PM) | PM | and [4/PM] of the HD/SD SDI OUT | |
|
| connectors.. | |
|
| NORMAL: | |
|
| Output the main line images.. | |
|
| PM: | |
|
| Output the picture monitor images.. | |
|
|
| |
COMPOSITE | NORMAL | Set the signal to be output from | |
(NORMAL/PM) | PM | [OUT/PM] of the VBS connectors.. | |
|
| NORMAL: | |
|
| Output the main line images.. | |
|
| PM: | |
|
| Output the picture monitor images.. | |
|
|
|
zzWhen the SDI OUTPUT3&4 (NORMAL/PM) item and COMPOSITE (NORMAL/PM) item are set to “NORMAL”, the menus and statuses will not be able to be displayed because the picture monitor images will not be output..
When you set one of items to “NORMAL”, set the other one to “PM”.. When you set both of the items to “NORMAL”, priority is given to the setting of the SDI OUTPUT3&4 (NORMAL/PM) item and the COMPOSITE (NORMAL/PM) item is set to “PM”..
27