Panasonic AK-HCU200E, AK-HCU200ES, AK-HCU200P, AK-HCU200PS Web settings, Menu operations

Web settings

You can connect the unit and a computer, and configure various settings from the Web browser screen..

Use a LAN cable (crossover cable) to directly connect the unit’s LAN connector for computer connections and the computer..

Set an IP address for the computer within the private address range while ensuring that it is different from the address of the unit.. Set the subnet mask to the same address as the unit..

Note

Network settings of the unit (default settings) zzIP address: 192..168..0..20

zzSubnet mask: 255..255..255..0

zzPort number: 80

zzDefault gateway: 192..168..0..1

Menu operations

Start the Web browser, and enter “http://192..168..0..20” in the [Address] box of the Web browser..

If the IP address is changed, the URL will also be different..

If this is the case, use the new IP address in the URL (http://new IP address/)..

zzMoving from one menu to another

To move from one menu to another, select the desired menu on the left of the screen..

This is equivalent to “TOP MENU” displayed on the picture monitor..

When either “OPERATION” or “MAINTENANCE” is selected above, the corresponding menu items are displayed here..

In the example shown, the OPERATION menu items are displayed..

The setting screen corresponding to the menu item selected here is displayed on the right..

zzWhen using Internet Explorer, do not use [Back] or [Next]..

zzDisplaying the setting screens

Select a menu item on the left of the screen to display the setting screen corresponding to that item..

26