Picture monitor (PM) displays (Continued)

Description of information displayed

„„WARNING

The warning information is displayed when trouble is detected in the unit, camera, or optical fiber multi cable..

The warning information items are displayed top aligned..

A displayed warning information item is cleared when the status becomes normal..

- WARNING -

CAM RCV LVL NG

CCU RCV LVL NG

Warning information items

Display item

Description

 

 

CAM RCV LVL NG

The level of the optical signal received by the

camera is low..

 

 

 

CCU RCV LVL NG

The level of the optical signal received by the

unit is low..

 

 

 

CABLE OPEN

The optical fiber multi cable is not connected..

 

 

CABLE SHORT

The optical fiber multi cable is shorted..

 

 

CAM FAN NG

Trouble with the cooling fan of the camera..

 

 

CCU HIGH TEMP

The temperature of the unit is abnormally high..

 

 

CAM WARM-UP

The camera is warming up..

 

 

ROP SAVING DATA

The data managed by the camera and this unit

is being saved to the memory card in the ROP..

 

 

 

To clear the warning information displays, press the button below.. ROP (AK-HRP200):CHARA button

„„IRIS display

When the information is not displayed on the picture monitor, display it by pressing the CHARA button of the ROP..

The camera number is displayed at the top left of the screen, the IRIS level is displayed at the bottom of the screen, and the IRIS f-value is displayed at the bottom right of the screen..

Set each item to be displayed on the “PM VIEW SETTING” screen that can be accessed by selecting “MAINTENANCE” on the menu.. However, this screen will not appear if the menu’s “IRIS LEVEL” setting is “OFF”..

Camera number

C1

IRIS f-value

F4.8

C--

--+-----

0

IRIS level*

*: The IRIS level is displayed based on the IRIS f-value..

„„Status displays

From the IRIS display screen, press the CHARA button of the ROP to display the statuses..

The camera number, scene file number, shutter value, and extender information are displayed at the top of the screen.. The ND filter value, gain value, and IRIS f-value are displayed at the bottom of the screen.. Set each item to be displayed on the “PM VIEW SETTING” screen that can be accessed by selecting “MAINTENANCE” on the menu.. However, when the “IRIS LEVEL” setting is “OFF”, the screen will be displayed first if the CHARA button of the ROP is pressed when the information is not displayed on the picture monitor..

Camera number

Scene file number

 

C1

CAM59.94i

SCENE1 1500

Shutter value

EX DZ×2

 

 

EX

×2

 

 

 

Camera format*

 

Extender information

 

 

1

12dB

CLOSE

IRIS f-value

ND filter value

Gain value

 

 

*: The camera format value indicates the format of the signal output from the camera..

4