Setting menu items (Continued)
zzSYSTEM Screen
This menu is used to initialize the menu settings..
Moving the cursor to the “SYSTEM” menu title and then pressing the SELECT dial redisplays the MAINTENANCE menu one level up..
SYSTEM
INITIALIZENO?
Move the cursor to INITIALIZE, press the SELECT dial, turn the SELECT dial to select “YES?”, and press the SELECT dial to initialize the menu settings..
The following data is initialized.. zzItems in the OPERATION menu zzItems in the MAINTENANCE menu
(Excluding, however, the NETWORK screen, VERSION screen, SYSTEM screen, and SD CARD screen..)
Furthermore, the setting information (following data) in the REMOTE OPERATION menu* is also initialized..
zzItems in the SD DETAIL menu zzItems in the SYSTEM menu
(Excluding, however, each of the HD BAR, MIC1 GAIN, MIC1 AMP, MIC2 GAIN, and MIC2 AMP items..)
*: The REMOTE OPERATION can be operated with the ROP..
zzSD CARD Screen
This menu is used to set the saving of data and upgrading of software using a memory card..
Moving the cursor to the “SD CARD” menu title and then pressing the SELECT dial redisplays the MAINTENANCE menu one level up.. zzWhen data in a memory card is being processed, do not turn off the
power of this unit or remove the memory card until processing is complete..
SD CARD |
|
DOWNLOAD DATA |
|
BACK UP | NO? |
LOG | NO? |
UPLOAD DATA |
|
BACK UP | NO? |
UPDATE | NO? |
CARD FORMAT | NO? |
Item | Remarks |
|
|
DOWNLOAD | Save this unit’s setting information (following data) to |
DATA BACK UP | the memory card.. |
| zzItems in the OPERATION menu |
| zzItems in the MAINTENANCE menu |
| (Excluding, however, the SYSTEM screen and SD |
| CARD screen..) |
| Furthermore, also save the setting information |
| (following data) in the REMOTE OPERATION menu*.. |
| zzItems in the SD DETAIL menu |
| zzItems in the SYSTEM menu |
| (Excluding, however, each of the HD BAR, MIC1 |
| GAIN, MIC1 AMP, MIC2 GAIN, and MIC2 AMP |
| items..) |
|
|
DOWNLOAD | Save the unit’s log information to the memory card.. |
LOG | The data is for maintenance.. |
|
|
UPLOAD DATA | Save the setting information (following data) saved in |
BACKUP | the memory card to this unit.. |
| zzItems in the OPERATION menu |
| zzItems in the MAINTENANCE menu |
| (Excluding, however, the NETWORK screen, |
| VERSION screen, SYSTEM screen, and SD CARD |
| screen..) |
| Furthermore, also save the setting information |
| (following data) in the REMOTE OPERATION menu*.. |
| zzItems in the SD DETAIL menu |
| zzItems in the SYSTEM menu |
| (Excluding, however, each of the HD BAR, MIC1 |
| GAIN, MIC1 AMP, MIC2 GAIN, and MIC2 AMP |
| items..) |
|
|
UPDATE | Upgrade the unit’s software or programs with files |
| saved to the memory card.. |
|
|
CARD FORMAT | Initialize the memory card.. |
| Initialization may take about 5 minutes.. |
|
|
*: The REMOTE OPERATION can be operated with the ROP..
Move the cursor to the desired item, press the SELECT dial, turn the SELECT dial to select “YES?”, and press the SELECT dial to execute the item..
Processing will not be possible if any of the following messages appears at that time..
Error message | Measure |
|
|
NO CARD | Insert a memory card.. |
(A memory card is not inserted..) |
|
|
|
WRITE ERROR | The memory card is likely to be defective.. |
(Writing is not possible..) | Replace the memory card.. |
|
|
WRITE PROTECT | Remove the memory card and unlock the |
(The memory card is write | |
protected..) |
|
|
|
CARD FULL | Delete any unnecessary data from the |
(There is no space for saving..) | memory card or replace the memory card |
| with a new one.. |
|
|
LOAD ERROR | Data written with other than this unit |
(Reading is not possible..) | cannot be read.. |
|
|
FORMAT ERROR | The memory card is likely to be defective.. |
(Formatting is not possible..) | Replace the memory card.. |
|
|
zzWhen the DOWNLOAD DATA process is performed, “WRITING.... .Do
not turn off power until complete..” is displayed and then the “SAVE OK” message is displayed when the process completes..
25