Panasonic AW-DU600 manual Connections, 1 2 3 4 5 6 7 8, Turn on the power to all units

Connections

Making a call

Make a call from the AW-DU600 of the transmitting system.

1.Turn on the power to all units.

2.Use the number keys on this adapter to enter the desired number.

The telephone number entered appears on the top section of the LCD panel.

0	1 2 3 4 5 6 7 8 9
			!Telephone number entered
1 :		P r e s s S t a r t

If the wrong number is entered by mistake, press the DELETE key ( # i 0 ) to delete 1 digit at a time, starting from the number entered last. Press the CLEAR key ( # i START ) to delete the whole number at once.

3.After entering the telephone number, press the START key.

When the connection is initiated, “Calling” appears on the LCD panel.

When the connection is established, “Connect” appears on the LCD panel and control of the pan-tilt head system from the control panel is possible.

<Note>

The message appearing on the LCD panel may differ, depending on the modem used.

4.Control the pan-tilt head system from the control panel.

When an AW-RP605 is being used as the control panel, set the OPERATE switch to ON to control the pan-tilt head system.

<Note>

OWhen an AW-RP505 or AW-RP605 is being used as the control panel, it is possible to switch the receiving pan-tilt head system using the CONTROL button on the control panel.

OIf the OPERATE switch on the AJ-RP605 is set to ON before the telephone line is connected, “NO CONNECT” is displayed on the LCD panel.

5.After control of the pan-tilt head is completed, press the STOP key.

“Hang Up” appears on the LCD display and the telephone line is cut.

Once the line is cut, “Press Start” appears on the LCD panel.

When ON has been selected for the “Menu-7 Pw-Off” setting, the power to the pan-tilt head will turn off at the same time as the telephone line is cut. When OFF has been selected for the “Menu-7 Pw-Off” setting, the power to the pan-tilt head will remain on when the telephone line is cut.

<Note>

If the POWER switch or OPERATE switch on the control panel is set to OFF before the telephone line is cut, the power to the pan-tilt head will turn off regardless of the “Menu-7 Pw-Off” setting.

<Note>

While the telephone line is being connected, none of the operating keys on the adapters will function except for the STOP key on the transmitting side.

12