Panasonic AW-DU600 manual Connections, Transmitting system connections

Connections

Turn off the power of all components before proceeding with the connections.

Transmitting system connections

Connect the control panel

	Coaxial cable
	(5C-2V)	Set the control panel
	10Base-T cable	selector switch to B.
		AW-PS301
Control	AW-DU600	RS-232C cable
panel
	Modem

AW-PS301

Telephone line

OWhen an AW-RP301 or AW-RP501 is being used, connect the receiving pan-tilt head system to the P1 CONTROL OUT connector.

OWhen an AW-RP505 or AW-RP605 is being used, it is possible to select either P1, P2, P3, P4 or P5 for the connected pan-tilt head system using the CONTROL button on the controller.

OWhen an AW-RP301, AW-RP501 or AW-RP505 is being used as the controller, an AW-PH350 can not be used as the pan-tilt head.

When an AW-RP605 is used

AW-RP605

Control panel

Version 45 or higher of the software must be installed in the AW-RP605.

Consult with your local dealer to check which software version is currently installed.

AW-RP605

Main unit

10Base-T cable

AW-DU600

Modem

AC adapter

AW-PS505

AC adapter

AW-PS301

Set the control panel selector switch to A.

Telephone line

6