In addition to the safety precautions given in “Read this first!”, also observe the following instructions.
Be sure to ask your dealer to perform the installation and connection work for the unit.
Connecting a power supply
zzInsert the DC plug for the external DC power supply all the way in until it locks into place.
LCD CONTRAST | REMOTE | POWER | DC plug | ||
|
| ||||
|
| GND | 12V | IN |
|
| SIGNAL |
|
| ||
|
|
|
| ||
|
|
|
|
| |
Do not allow any foreign objects to enter inside the unit
zzAllowing water, metal items, food or drink, or other foreign objects to enter inside the unit may cause a fire or electric shock.
Installation location
zzThis unit is designed for indoor use only. zzInstall and use the unit in a stable location.
zzAvoid installing the unit where it will be exposed to direct sunlight. zzInstalling the unit in a location with a lot of humidity, dust, or vibration
may result in a failure.
zzWhen the unit will not be used for a long time, turn off the power switch and remove the DC plug for the external DC power supply to save power.
Example of embedding the unit in a desktop
When you will use the unit embedded in a desktop, refer to the following procedure.
1.Make mount angles suitable for the installation location.
<Mount angle example>
zzDesk mounting side | Unit: mm (inch) | |
| 25 (31/32) | |
160 | Ø5 (3/16) | |
(Desk mounting holes) | ||
|
zzUnit mounting side
210
| 2 | 30 | |
| (3/32) | ||
|
| ||
| 21 | 35 | |
Ø3.5 (1/8) | (13/16) | ||
(Unit mounting hole) |
| ||
|
|
2.Attach the mount angles to the sides of the unit with four M3 screws.
Unit
M3 screws
Mount angle
Note
zzFor details on the dimensions for attaching mount angles to the unit, refer to “Appearance” (page 11).
3.Insert the unit into the desktop hole and then fix it in place with four screws.
zzProvide screws that match the size of the desktop mounting holes (e.g. Ø5 mm [3/16 inches]).
4.If necessary, make and attach a panel to cover the rest of desktop hole.
Panel to cover hole
10