1.Turn on the unit’s power.
Set the POWER switch to the ON position.
Power is supplied to the unit, and the POWER indicator turns on. zzWhen the “2. AUTO ON” item in CAMERA SETUP menu [24] is set to “On”, the power of the remote cameras also turn on
simultaneously with the turning on of the unit's power.
⇒“How to turn on the power of the remote cameras” in <Operations and Settings> (page 3)
zzThe remote cameras set to “Serial” or “Network” in CTRL TYPE menu [36] are targets for turning the power on simultaneously with the turning on of the unit's power.
⇒“Setting the connection types (serial/IP/no connection) for remote cameras” (page 30)
5.Adjust the lens iris.
When the FOCUS/ZOOM/IRIS ENABLE button [ENABLE] indicator is on, turn the IRIS dial to adjust the lens iris.
6.Adjust the focus.
When the FOCUS/ZOOM/IRIS ENABLE button [ENABLE] indicator is on, turn the FOCUS dial to adjust the lens focus.
When the one‑touch auto focus button is pressed during manual focusing, the mode switches to auto focusing mode temporarily, and the subject is brought into focus automatically.
zzOTAF (one‑touch auto focus) is enabled for remote cameras which are equipped with the OTAF function.
2.Select a remote camera.
When the mode selection button [SELECT] indicator is on, press a [CAMERA SELECT/GROUP SELECT] button to select the remote camera to control from the unit.
3.Adjust the direction in which the remote camera points.
When the PAN/TILT ENABLE button [ENABLE] indicator is on, use the PAN/TILT lever to adjust the direction in which the remote camera points.
4.Adjust the zoom.
When the FOCUS/ZOOM/IRIS ENABLE button [ENABLE] indicator is on, use the ZOOM button to adjust the lens zoom.
When the TELE side is pressed, the zoom is set to the telephoto mode, and when the WIDE side is pressed, it is set to the wide‑angle mode.
7.Turn off the unit’s power.
Set the POWER switch to the OFF position.
The unit’s power is turned off, and the POWER indicator turns off. zzWhen the unit’s power is turned off, the power of the connected
remote cameras does not turn off.
zzTo turn off the power of the remote cameras, select and execute “ALL OFF↓” or “GROUP OFF↓” in the “1. CAM POWER” item of CAMERA SETUP menu [24].
⇒“How to turn off the power of the remote cameras” in <Operations and Settings> (page 4)
1, 7
| 2 |
5 |
|
4 | 3 |
6 |
|
19